Views: 41,345

Glowing veins with a head-mounted UV blacklight

All > Fashion > Clothing > Costumes > Glowing veins with a head-mounted UV blacklight by natetrue

640 800 Full

640 800 Full

640 800 Full

When faced with a dilemma on what costume to wear last Halloween, I decided to spice up a monk costume. My friends always played with highlighter on our faces when under a blacklight, and it gave a great glowing face-paint effect, but I wanted to be able to roam freer than that, not having to be under a blacklight for the effect to work.

So I decided to make a head-mounted blacklight with some leftover LEDs from my Time Fountain project (which I purchased on eBay - search for uv leds). Here I just used four of them, but if you're reproducing this project I suggest you use more. The effect was fairly dim.

---

640 800 Full

The rig is fairly simple - constructed out of 1/16" brass rod (welding rod - low fuming brass, no flux), soldered together, and painted black. The rods themselves act as the cathodes for the LEDs and some more wires act as the anodes. They're connected through a switch to a rechargeable 3.6v Lithium-Ion battery (NP-700 battery).

---

640 800 Full

Each of the LEDs is sawn off so that the chip inside acts as a point source rather than a directional light. All sides of the LED except the front are painted black to prevent the purple light from escaping.

---

640 800 Full

As a finishing touch, I mixed fluorescein also from my Time Fountain project with normal contact lens solution fluid. This dyed my contact lenses (I wear contact lenses) with the fluorescent color, making them glow in the UV light, too. The effect wears off after a few hours from the rinsing effect of tears, so I had to reapply pretty often.

Fluorescent boogers ahoy!

---

640 800 Full

The effect was pretty cool, I'd say.

---

640 800 Full

Bonus 3-d image of the rig. Cross your eyes to see it - if you can, it will give you a better idea of the form of the rig.